Bullet Resistant Wall Panels
Need Help? Call Us At 1-866-286-4400
Free Shipping within the Continental United States
Need Help? Call Us At 1-866-286-4400
Free Shipping within the Continental United States
Our bullet resistant panels are the best option
for adding vital protection to your business or home.
They have gone through rigorous testing and refinement to achieve
the approval of the United States Marshall, the Institute of Justice,
and the General Services Administration. All of our panels
are UL Security listed and are 1 hour fire rated.
Our panels are manufactured with a mixture of
fiberglass and resin, making them light enough to
handle while still maintaining required levels of protection.
Choose a panel size that fits your needs, then cut the
panel to any shape using the optional add on diamond blade.
Every panel is manufactured with strict requirements
in order to meet the UL Security Listed standards.
They come in a variety of protection levels, designed
to meet your budget and security needs. Our most
common panel sold is the Level 3, which is suitable
for most all locations. We also offer a bulk discount.
Our panels can be installed directly over existing
drywall using adhesives or drill bits and screws.
For new construction, panels can be installed
behind the drywall, using batten strips to secure the
Covenant Security Equipment takes pride in every product
that we sell. Quality is always guaranteed, and we back it up
with a 12-month warranty. Click Here to read our
Standard Product Warranty.
When you add your items to the shopping cart we will automatically apply the discounts. Feel free to contact us with any questions or would like a written quote.
|Number of Panels||Discount Per Panel|
|3 - 9||$75 Off Per Panel|
|10 - 20||$100 Off Per Panel|
|20+||$150 Off Per Panel|
Any butt joints or seams create a ballistic weakness. To insure ballistic integrity, we recommend that you incorporate 4" overlap strips (battens). These strips insure a 2" ballistic overlap on the back of each side of the seam. Conformity to curved surfaces can be handled by placing 12" to 18" vertical strips following the inside curvature of the surface to be protected. The same 4" overlap strips should be employed at each joint.
The panels easily accept a wood or plastic veneer using contact cement. It may also be upholstered or painted. To paint we recommend "roughing up" the surface with sandpaper. Panels can be used as a drywall supply alternative, but will need to be installed a little differently, so make sure to check out our installation instructions.
Click Here to Purchase Batten Strips
Starting at $58.00 * Delivered
The following recommendations are designed to assist in the installation of bullet resistant fiberglass panels, as well as to preserve the ballistic protection the panels are designed to provide. Different elements of working with the product and certain challenges are addressed, in addition to important options and expert tips to consider when ordering the product. The material is manufactured by mechanically injecting woven roving ballistic grade fiberglass cloth with a thermoset polyester resin. The impregnated cloth is then placed in a hydraulic hot press and pressed into flat rigid sheets.
Panel Sizes and Cutting
Covenant Security Equipment provides panels in any combination of 3’, 4’ & 5’ widths by 8’, 9’ & 10’ lengths. In the field, panels can be cut with a diamond-grit blade. For electrical boxes and other small openings, a diamond grit blade (available through most builder’s supply in the ceramic tile section) on a reciprocating saw should be sufficient. In addition to wearing protective clothing, a fan can be placed behind the cutting area to help blow away fiberglass particles.
Cut using ordinary carpentry tools. Circular saw, table saw, panel saw, saber saw, etc. Use the following blades: RemGrit "Grit Edge": GC703 7" Circular, GC805 8"Circular, GC915 12" Circular, GJ18 Saber Saw or a Tenryu TSD Series 7". The 7” Blade cuts extremely hard abrasive materials.
Check out the 7" TSD Series Blade or contact us for custom water-jet cutting.
Fastening and Drilling
Bullet Resistant Fiberglass may be drilled using high speed steel twist drills. Materials should be drilled at a slow speed. Panels may be attached using self-tapping drywall screws. When attaching a panel to a stud wall on which drywall will be the exterior surface, simply use enough screws to hold the panel to the studs, then come back with a complete screw pattern to the studs when hanging the drywall on top. If a different appliqué is to be used over the panels and a flush surface is required, a counter-sink hole may be used before adding the screws. Panels up to 1-1/8” and thicker may require pre-drilling the fastener holes to prevent the screw heads from breaking, as well as to facilitate the installation. It is recommended that you use a carbide or cobalt tip drill bit at medium speed with medium pressure. Low carbon (high-speed steel) bits may be used, but will typically have a shorter lifespan.
Adhesives and Laminating
Panels can also be attached with the use of adhesives. One product available is PL Premium Polyurethane Construction Adhesive. For stronger adhesion to non-porous substrates, such as aluminum, steel and stainless steel, or bonding one panel to another, a 2-part Methyl Methacrylate (MMA) adhesive may be utilized, such as Plexus MA 320. Laminates can be applied with standard contact adhesives and should be thick enough to avoid transfer of texture to the finished surface. Apply adhesive per manufacturer’s instructions.
Any butt joints or seams create a ballistic weakness at the seam. To insure ballistic integrity, we recommend that you incorporate 4" overlap strips (battens). These strips insure a 2" ballistic overlap on each side of the seam.
For typical wall and mill work installations, a 4” wide batten strip of the same level material should be specified at the butt-joints to provide a minimal 2” overlap from one panel to the next, or each side of the joint. Batten strips are available as separate items or can be cut in the field from raw panels.
The batten strips can be attached directly to the panels and should be used where any vertical or horizontal joints occur. Battens are not required where a 90˚ corner occurs, in which case a panel should simply overlap to the next panel at the corner (see diagram).
By having the panel joints between the studs, the battens can be attached without pushing out the wall further. In the case of electrical cut-outs, an additional 12” high piece of the same level of material may be installed from stud-to-stud, as close as possible to the hole.
Panels easily accepts a wood or plastic veneer using contact cement. It may also be upholstered or painted. To paint we recommend "roughing up" the surface with sandpaper.
Install with Drywall
Install with Concrete
Anchoring Schedule 1
Anchoring Schedule 2
Curved Desk or Wall
Bending panels around a curved desk or wall is possible using Level 1 panels only. A level 3 rating can be achieved by cutting the panels to size and segmenting them or by overlapping the panels to cover the seams. Using stacked Level 1 panels at 1/4” thick will equal the 1/2” Level 3 desired protection.
|BR Level (UL752)||Shots||Ammunition (Grains)||Velocity Min/Max FPS||Thickness (inches)||Nominal (lbs) Per Square Foot||Fire Rating (Hours)||Weapon|
|Level 1||Single||124 GR FMJ||1175-1295||1/4||2.6||1||9mm Full Metal Copper Jacket with Lead Core|
|Level 2||Single||158 GR SP||1250-1375||5/16||3.6||1||.357 Magnum Jacketed Lead Soft Point|
|Level 3||Single||240 GR LEAD||1350-1485||7/16||4.8||1||.44 Magnum Lead Semi-wadcutter Gas Checked|
|Level 4||Single||180 GR SP||2540-2794||1-3/8||13.9||1||.30 Caliber Rifle Lead Core Soft Point (.30-06 Caliber)|
|Level 5||Single||150 GR FMJ||2750-3025||1-7/16||14.8||1||7.62mm Rifle Lead Core Full Metal Copper Jacket, Military Ball (.308 Caliber)|
|Level 6||Multiple||124 GR FMJ||1400-1540||3/8||3.9||1||9mm UZI Full Metal Copper Jacket with Lead Core|
|Level 7||Multiple||55 GR FMJ||3080-3388||1-1/8||11.7||1||5.56mm M-16 Rifle Full Metal Copper Jacket with Lead Core (.223 Caliber)|
|Level 8||Multiple||150 GR FMJ||2750-3025||1-716||15.2||1||7.62 Rifle Lead Core Full Metal Copper Jacket, Military Ball (.308 Caliber)|
Waterjet cutting is accomplished by using a sophisticated Waterjet System. A waterjet allows for cutting of soft and hard materials using highly pressurized water and an abrasive if required. Precision cutting tolerances are achievable as well as beveled cutting without the associated heat that is prevalent in other types of advanced cutting systems.