Free Business Shipping on Most Products in the Continental U.S.

5 x 10 Bullet Resistant Wall Panels

Need Help? Call Us At 1-866-286-4400


$705.00 + FREE SHIPPING*

Free Shipping within the Continental United States

    print estimate icon Print Proposal
    fill out our form for a custom quote Request a Custom Quote

    Bulk Discounts

    Number of Panels Discount Per Panel
    3 - 9 $75 Off Per Panel
    10 - 20 $100 Off Per Panel
    20+ $150 Off Per Panel


    Secure your room and facility with our bullet proof woven fiberglass panels. Our panels come in various sizes and can be used in your security wall, panic room, safe room, or anywhere a ballistic protective barrier is desired or replacement for your wall board.

    Covenant Security Equipment offers UL 752 Listed Bullet and Blast Protection Composite Panels. This material is manufactured using a woven roving ballistic grade cloth that is manufactured in-house. The cloth is mechanically injected with resin and placed in a hydraulic hot press, then pressed into flat rigid sheets. By using an anti-ballistic grade fiber in our cloth, we can maximize the ballistic performances by consistently achieving a uniform resin to fiber ratio. This allows the proper ply de-lamination to capture projectiles.

    Bullet and Blast Protection Panels are approved by the U.S. Marshal Service, the General Services Administration, and comply with NIJ standards. Please refer to our Ballistics Chart for detailed information. Our composite panels are also compliant with ASTM E119A for one hour fire wall construction.

    Make Up
    Multiple layers of woven roving ballistic grade fiberglass cloth woven in house impregnated with a thermoset polyester resin and compressed into flat rigid sheets designed to capture projectiles. 

    Preformance Level
    Underwriters Laboratory UL 752 11th Edition Standard for Bullet Resisting Equipment. One hour fire rated to ASTM E119-00a Building Construction and Materials. 

    Manufacture Warranty
    Materials and workmanship shall be warranted against defects for a period of two (2) years from the date of receipt at the project site. 

    Any butt joints or seams create a ballistic weakness. To insure ballistic integrity, we recommend that you incorporate 4" overlap strips (battens). These strips insure a 2" ballistic overlap on the back of each side of the seam. Conformity to curved surfaces can be handled by placing 12" to 18" vertical strips following the inside curvature of the surface to be protected. The same 4" overlap strips should be employed at each joint.

    The panels easily accept a wood or plastic veneer using contact cement. It may also be upholstered or painted. To paint we recommend "roughing up" the surface with sandpaper.  Panels can be used as a drywall supply alternative, but will need to be installed a little differently, so make sure to check out our installation instructions.


    Curved Desk or Wall
    Bending panels around a curved desk or wall is possible using Level 1 panels only.  A level 3 rating can be achieved by cutting the panels to size and segmenting them or by overlapping the panels to cover the seams.  Using stacked Level 1 panels at 1/4” thick will equal the 1/2” Level 3 desired protection.  

    Cutting the Panels
    Use our RemGrit circular saw blades.

    More information visit our blog
    Installation for Bullet Resistant Panels

    BR Level (UL752) Shots Ammunition (Grains) Velocity Min/Max FPS Thickness (inches) Weight (lbs) Nominal (lbs) Fire Rating (Hours) Weapon
    Level 1 Single 124 GR FMJ 1175-1295 1/4 2.6 62.4 1 9mm Full Metal Copper Jacket with Lead Core
    Level 2 Single 158 GR SP 1250-1375 5/16 3.6 86.4 1 .357 Magnum Jacketed Lead Soft Point
    Level 3 Single 240 GR LEAD 1350-1485 7/16 4.8 115.2 1 .44 Magnum Lead Semi-wadcutter Gas Checked
    Level 4 Single 180 GR SP 2540-2794 1-3/8 13.9 333.6 1 .30 Caliber Rifle Lead Core Soft Point (.30-06 Caliber)
    Level 5 Single 150 GR FMJ 2750-3025 1-7/16 14.8 355.2 1 7.62mm Rifle Lead Core Full Metal Copper Jacket, Military Ball (.308 Caliber)
    Level 6 Multiple 124 GR FMJ 1400-1540 3/8 3.9 93.6 1 9mm UZI Full Metal Copper Jacket with Lead Core
    Level 7 Multiple 55 GR FMJ 3080-3388 1-1/8 11.7 280.8 1 5.56mm M-16 Rifle Full Metal Copper Jacket with Lead Core (.223 Caliber)
    Level 8 Multiple 150 GR FMJ 2750-3025 1-716 15.2 364.8 1 7.62 Rifle Lead Core Full Metal Copper Jacket, Military Ball (.308 Caliber)
    Download the PDF